This dataset contains global dryland literature abstracts from over the last 75 years (8218 articles) to identify areas in arid ecology that are well studied and topics that are emerging.

This dataset contains UAV multispectral imagery collected as part of a field trial to test the Unmanned Aerial System to be used for the TERN Drone project. The UAS platform is DJI Matrice 300 RTK with 2 sensors: Zenmuse P1 (35 mm) RGB mapping camera and Micasense RedEdge-MX (5-band multispectral sensor). P1 imagery were geo-referenced using the onboard GNSS in M300 and the D-RTK 2 Mobile Station. P1 Camera positions were post-processed using <a href="https://www.ga.gov.au/scientific-topics/positioning-navigation/geodesy/auspos">AUSPOS</a>. The flights took place between 14:58 and 03:08 at a height of 80m with a flying speed set to 5 m/s. Forward and side overlaps of photographs were set to 80%. <br><br> Micasense multispectral sensor positions were interpolated using P1, following which a standard workflow was followed in Agisoft Metashape to generate this orthomosaic (resolution 5 cm). Reflectance calibration was performed using captures of the MicaSense Calibration Panel taken before the flight. The orthomosaic raster has the relative reflectance (no unit) for the 5 bands (B, G, R, RedEdge, NIR). This cloud optimised (COG) GeoTIFF was created using rio command line interface. The coordinate reference system of the COG is EPSG 7855 - GDA2020 MGA Zone 55. <br><br> In the raw data RedEdge-MX image file suffixes correspond to bands like so - 1: Blue, 2: Green, 3: Red, 4: NIR, 5: Red Edge. However, in the processed Orthomoasic GeoTIFF, the bands are ordered in the wavelength order (Blue, Green, Red, Red Edge, NIR).

This dataset contains bird occurrence data collected at the Cumberland Plain site from 2015 - 2017.

This dataset is a collection of drone lidar data from plots across Australia (AusPlots, SuperSites, Cal/Val sites to be established in the future). The aim of these drone surveys is to capture vegetation structure. The standardised data collection and data processing protocols developed in 2022 are based on the DJI Matrice 300 (M300) RTK drone platform. Lidar sensor DJI Zenmuse L1 is used with DJI Matrice 300 (M300) RTK platform to capture RGB colourised 3D point clouds. The data is georeferenced using the onboard GNSS in M300 and the D-RTK 2 base station. DJI Terra software was used to generate 3D point clouds from the raw lidar data. The protocols include flight planning and data collection guidelines for a 100 x 100 m TERN plot, and the processing workflow used on DJI Terra. Mission-specific metadata for each plot is provided in the imagery/metadata folder (please refer to the imagery collection). The Drone Data Collection and Lidar Processing protocols can be found at <em> https://www.tern.org.au/field-survey-apps-and-protocols/ </em>.

The physical drivers of ecosystem formation – macroclimate, lithology and landform – along with vegetation structural formations are key determinants of current ecosystem type. Each combination of these ecosystem drivers – each ‘ecological facet’ – provides a unique set of opportunities and challenges for life. <br> Management and conservation should seek to understand and take in to account these drivers of ecosystem formation. By understanding the unique combinations of these drivers management strategies can plan for their full range of variation, and conservation efforts can ensure that unique ecosystems are not lost. Unfortunately, there is currently no Australia-wide standardized map of ecological facets at management-appropriate scales. <br> By understanding the magnitude and distribution of unique combinations of these drivers, management strategies can plan for their full range of variation, and conservation efforts can ensure that unique ecosystems are not lost. Additionally, by improving our understanding of the past and present conditions that have given rise to current ecological facets this dataset could facilitate future predictive environmental modelling. Finally, this data could assisting biodiversity conservation, climate change impact studies and mitigation, ecosystem services assessment, and development planning <br> Further information about the dataset can be found at <a href="https://ternaus.atlassian.net/wiki/spaces/TERNSup/pages/2276130817/GEOSS+Ecosystem+Map">GEOSS Ecosystem Map,TERN Knowledge Base </a> .

This dataset contains UAV multispectral imagery collected as part of a field trial to test the Uncrewed Aerial System to be used for the TERN Drone project. The UAS platform is DJI Matrice 300 RTK with 2 sensors: Zenmuse P1 (35 mm) RGB mapping camera and Micasense RedEdge-MX Dual (10-band multispectral sensor). P1 imagery were geo-referenced using the onboard GNSS in M300 and the D-RTK 2 Mobile Station. P1 Camera positions were post-processed using <a href="https://www.ga.gov.au/scientific-topics/positioning-navigation/geodesy/auspos">AUSPOS</a>. Flight conducted between 10:26 am and 10:47 am AEDT at flying height 80 m, forward and side overlaps for Zenmuse P1 set to 80%. MicaSense RedEdge-MX Dual triggered using timer mode (every second). <br><br> Micasense multispectral sensor positions were interpolated using P1, following which a standard workflow was followed in Agisoft Metashape to generate this orthomosaic (resolution 5 cm). Reflectance calibration was performed using captures of the MicaSense Calibration Panel taken before the flight. The orthomosaic raster has the relative reflectance (no unit) for the 10 bands (Coastal Blue, Blue, Green 531, Green, Red 650, Red, RedEdge 705, RedEdge, RedEdge 740, NIR). The cloud optimised (COG) GeoTIFF was created using rio command line interface. The coordinate reference system of the COG is EPSG 7855 - GDA2020 MGA Zone 55. <br><br> In the raw data RedEdge-MX image file suffixes correspond to bands like so - 1: Blue, 2: Green, 3: Red, 4: NIR, 5: Red Edge, 6: Coastal Blue, 7: Green 531, 8: Red 650, 9: RedEdge 705, 10: RedEdge 740. However, in the processed Orthomoasic GeoTIFF, the bands 1-10 are ordered as per the Central Wavelength (Coastal Blue, Blue, Green 531, Green, Red 650, Red, RedEdge 705, RedEdge, RedEdge 740, NIR).

This dataset contains bird occurrence data collected at the Daintree Rainforest, Cape Tribulation site in 2014.

This dataset contains bird occurrence data collected at the Calperum Mallee site from 2012 - 2014.

This dataset contains bird occurrence data collected at the Alice Mulga site in 2015.

This dataset contains bird occurrence data collected at the Litchfield Savanna site in 2015.